TendaF3- Change WiFi Password

TendaF3- Change WiFi Password

(Tenda)F3-How to change your SSID and password

Step 1: Login the homepage.

1.   Open a browser then type “192.168.0.1” into the Address Bar, press Enter. Then enter the password of this page. Tap “Login”.
 
 
Note: The default password is shown on the bottom of the router. If you have changed it and you also forgot it, see “Forget your password?” below the “Login” button.
 
2.   Then the interface will turn into the homepage, tap “Wireless Settings”, change your SSID and password in this page, and tap “OK”.
 
 
Note: For Security Mode, the WPA/WPA2-PSK is recommended.
 
3.   The notice window would be shown on the top. Tap “OK” and you will be disconnected with your Wi-Fi. Wait for 30 seconds, and connect with your router by connecting to the new SSID and password you set before.
 
 

NOTE: If you forget your password you just set before, you can reset the router into factory setting and configure your password again.

    • Related Articles

    • (Tenda)F3-How to setup PPPOE Mode

      (Tenda)F3-How to setup PPPOE Mode Note: If you have no idea about what is the connection type of your network, please contact the ISP (Internet Service Provider) to confirm it. Step 1: Connect the broadband line to the WAN port of router, and then ...
    • Finding your MAC address

      A MAC address (also known as a Wi-Fi address, physical address, or Ethernet ID) always has 6 pairs of characters with a dash or colon between them (for example: 00-1a-22-3c-dd-5e). To get the MAC address for a(n): Apple iOS device: Go to Settings > ...
    • Setup Scan to Folder - Sharp

      Setup Scan to Folder - Sharp Create user -> scan password scan Create Shared Folder on PC and give user scan full access Open Eset Antivirus -> Setup -> Networks Connections Make sure the connected network connection is trusted Test if you can ping ...
    • How to configure Cudy Wi-Fi router into Wireless Extender Mode?

      How to configure Cudy Wi-Fi router into Wireless Extender Mode? Common network topology: Step 1: Open a web browser and go to http://cudy.net or http://192.168.10.1. Use "admin" as password to log in. For details, please refer to How to log into the ...
    • GXP21XX End User Guide

      Grandstream Networks, Inc. GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 Enterprise IP Phones User Guide